|
Main page > Production > Machines for PET bottle producing > Machine for PET bottle producing B3-VVP-3
| Machine for PET bottle producing B3-VVP-3 | |
| Machines are intended for producing of plastic PET bottles by the way of blowing in pressform set of forming bottles, preliminary warmed-up half-finished preform in warming set of preform. |  |
| TECHNICAL INFORMATION | ||
| Productivity, bottles in hour | 700 |
|
| Air pressure, MPa | For control | 0,6 |
| For blowing | 1,4.1,6 |
|
| Rate of air, m3/h | For control | 0,2 |
| For blowing | 0,4 |
|
| Rate of water with pressure 0,4 МPa, m3/h | 1,5 |
|
| Overall dimensions (L х W х H), mm | Aggregate of heating preform | 1215 x 600 x 1334 |
| Aggregate of forming bottles | 1200 x 550 x 1741 |
|
| Mass without compressor, kg | 900 |
|
Construction peculiarities |
| Semi-automatically machine |
| Separate aggregates for heating preform and forming bottles. |
| Quantity of places in preform - 2. |
| Completed by compressor. |
